Showing all 7 results
Thanks to special additives and pigments, Philament PLA is characterized by easy printability and saturated colors. Even when you print in one layer, you will get the same color you see on the spool. Printable in a wide temperature and printing speed range. The Philament PLA can be used without heated bed, and even with an open 3D printer you will get good printing quality.
Az 1 kg-os Philament termékeket átlátszó műanyag csévére tekercselve hozzuk forgalomba.
PETG is an ideal choice for 3D printing when reduced warping and high heat resistance are important requirements. Objects printed with PETG are heat resistant up to 85° C, and they are also resistant to chemical influences (e.g. chemicals, solvents, biologically active agents). Printing with PETG is almost as simple as with PLA. PETG is odorless when printing.
Two colors on one spool: A total of 1 kg of PLA filament in two colors (colors can’t be selected), approximately equally proportioned. One of the colors is usually black or white. It is easy to use the filament from the spool, the two colors are separated and paralell winded.
6 x 100 gram filament in different colors. Colors: 2-2 black and white, 1-1 from red, blue, green, orange or yellow colors.
An easy-to-use 2,85 mm diameter filament for 3D printing pens. Highly adhesive, nice saturated colors, and easy to work with.
Philament Pen's raw material is environmentally friendly PLA, and it does not cause unpleasant smells during printing.
Philament Pen is compatible with most popular 3D printing pens, such as e.g. 3Doodler Create, 3Doodler Pro, and any other pens which work with 3 mm diameter filaments.
Use them in “low temp” mode. While drawing, do not touch neither the end of the pen, nor the melted filaments, because it is hot, and may cause burns or damage the heat-sensitive surfaces.