Showing 1–16 of 21 results
Thanks to special additives and pigments, Philament PLA is characterized by easy printability and saturated colors. Even when you print in one layer, you will get the same color you see on the spool. Printable in a wide temperature and printing speed range. The Philament PLA can be used without heated bed, and even with an open 3D printer you will get good printing quality.
Philament Gypsum – just like Philament Model and Essence – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. The mineral content of Philament Essence is minimal, it does not contains pigments, and this combination resulted in an easy-to-use filament. The surface of printed objects is homogeneous and matt. Layers are barely visible, even in case of objects with shorter printing time, and the usual surface roughness is blurred. Mechanical post-processing of objects (polishing, carving, etc.) is easier than in case of standard PLA.
Philament Model – just like Philament Gypsum and Essence – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. The mineral content in the Philament Model is medium, less brittle than Gypsum filament, as for its basic characteristics it is between Gypsum and Essence filaments. This filament contains white pigment also, so the printed objects are off-white, with a matte finish, and the details are well outlined, which is useful for modelers. The printed models can be painted much easily than those printed with standard PLA or ABS filaments. The object can be sanded – both dry and wet – , and it is easy to cut, thus most accurate models can be printed with Philament Model. UV-resistant filament. It is one of the most versatile Philament products.
Philament Gypsum – just like Philament Model and Essence – is member of the product group containing gypsum. Their common characteristic is that the added gypsum changes the usual properties of the plastic, both functionally and aesthetically. Philament Gypsum has the highest mineral content, thus it is yellowish, looks like rock or gypsum. The printed objects can be shaped very easily: they can be cut with a sharp tool, sanded, and polished, thus facilitating the post-processing of the object. It is easy to paint also, even with water-based paint. Due to the high mineral content the suggested printing temperature is lower than in case of standard PLA: 185-210 0C.
This filament is used mainly in the electronics industry, where electrostatic charging of a printed object can cause problem. Objects printed with Philament ESD does not charge electrostatically due to the special additives. Philament ESD provides surface resistance at megaohm order of magnitude, but this highly depends on the size and shape of the printed object. For proper printing results, we recommend 210-125 ° C printing temperature, at least 0.4 mm nozzle, and printing speed no higher than 60 mm / sec.
The strength, hardness, and heat resistance of filament reinforced with glass fiber go far beyond the characteristics of the standard PLA. It can withstand heat of up to 100 0C. The biopolymer-based filament is also suitable for printing lightweight parts, even applicable for replacing metal parts. The printed surface is unique, glassy, so it is also a perfect choice for designers. The warping of objects printed with Philament Glass Reinforced is very low. No need for any special nozzle. Recommended printing parameters: 215 0C nozzle, 60 0C bed.
This PLA-based filament offers enhanced possibilities for industrial applications. The thermal stability of objects printed with Philament Engineering is extremely high, they could bear up to 140 °C heat, without any heat treatment after printing. Philament Engineering has excellent impact resistant and durability properties compared to the basic PLA. This performance is due to different additives and lubricants. Based on the tests, the printed objects do not warp and they keep their shape well. Thanks to this characteristics, Philament Engineering can be used for metal replacement also. The surface of objects printed with Philament Engineering filament is matt.
Transparent PLA filaments have a slight yellowish color, in addition, if you print thicker objects, the transparency almost disappears. With Philament High Transparent you can get an almost water-clear finish. It is an easy-to-print filament, in a wide range of printing temperature. The transparency of the printed object can be improved by changing the printing parameters: a nozzle with larger diameter, and the higher temperature and the slower printing also result in more transparent surface.
Philament Antibacterial is a special filament which provides antimicrobial protection against a wide variety of microorganisms. Its antibacterial and fungicide properties are based on metal ions. In objects printed with Philament Antibacterial filament, the built-in metal ion complexes block the metabolic processes of bacteria and fungi by an enzymatic reaction, thus preventing their growth. A similar mechanism is present at disinfectants, various preservatives, wash-off and leave-on products.
Philament Antibacterial provides lifelong lasting antimicrobial protection against Gram positive (e.g. Enterococcus, Bacillus etc.) and Gram-negative (e.g. Salmonella, Legionella etc.) bacteria, and different fungi, yeasts and algae fungus. Its use is advantageous where the presence of these microorganisms is harmful, e.g. in hospitals, shops, households, beauty salons. With Philament Antibacterial, objects exposed to microbial infection can be 3D printed.
The active metal ion substance is incorporated in the PLA polymer matrix, and it does not have any negative impact on PLA’s favorable mechanical and printing properties. Philament Antibacterial can be printed in wide range temperature: 195-215 0C, without changing antibacterial properties. Solubility of the active metal ions and their migration to the surface is very low, so the dissolution from 3D printed objects is minimal, providing long-lasting protection for the object.
The active antimicrobial substance has been extensively tested using internationally accepted methods: ISO 22196, ASTM E2180 and JIS standards.
A fából készült tárgyak szépek, természetesek. Ezért határoztuk el egy olyan PLA szál elkészítését, amely visszaadja a fa esztétikus tulajdonságait. A PLA-hoz különböző származású és szemcseméretű falisztet adtunk. A Philament Wood szálból szépen nyomtathatók fahatású tárgyak, miközben a műanyag mechanikai tulajdonságai is megmaradnak. A tárgyak hasonló hőmérsékleten és körülmények között nyomtathatók, mint a hagyományos PLA szálak.
Philament Tribo is a special filament with unique tribological characteristics, similar to Teflon® (DuPont). This material designed for printing parts which are in contact with each other, and are moving on each other surfaces.
High wear resistance, high strength, matt-white printed surface. The printed object can be easily shaped and polished.
Philament Support is a PLA-based filament, developed for 3D printings which need support.
As opposed to the soluble support materials Philament Support is an easy to break-away filament, so the vast majority of the support material can be removed quickly. Any remaining support on the surface can be completely removed by sanding. The result is a clean printing surface, there is no or minimal need for post-processing.
Also suitable for printing the complexly structured supports. It is compatible with FDM filaments and works well with them.
Printing with Philament Support is simple, settings are similar to PLA’s: printing temperature 190-215 0C, bed temperature 60 0C.
Philament Cleaner was designed for cleaning the extruder and the nozzle. This special filament incorporates short glass fibers thus removes staining and polishes the inner surface. Recommendation of use: print about 20 cm filament which cleans the extruder. If the outflow material clean, it means that the extruder is also clean. In some cases a little bit more material is needed. The efficiency of the cleaning process could increase, if you stop the printing for a while and then continue it. Regular use of Philament Cleaner reduces the plugging, increase the shelf life of the extruder. It is also strongly recommended if you changes often the different colored filaments or swap different raw materials.
The PLA raw material of PLA Advanced was developed especially for manufacturing 3D printing filaments, which has to meet higher printing needs. The objects printed with this filament are stronger and more durable.
Philament PLA Advanced also has a higher heat resistance, up to 85 0C. With this value, it also competes against PETG and ABS filaments. This filament is less brittle, and with excellent layer adhesion we can achieve an exceptionally even surface and more precise printing. The surface of printed object can be shiny at elevated printing temperature and matt at lower temperature, but this depends on the printer also.
Philament PLA Budget filament, just like other Philament PLA products, provide excellent printing results. Their shrinkage is minimal, you can print them even on an unheated bed. They are available in black, white, blue, red and silver gray colors, on 750 gram rolls at a reasonable price.